Server Technology PT40 Installationshandbuch PDF herunterladen (Seite 45)

Smart Cabinet Distribution Unit Operations • 45

Installation and Operations Manual

Changing the UPS type:

The Set UPS Type command is used to change the type of UPS for each UPS record.

To change a UPS record:

At the Smart CDU: prompt, type set ups type and press Enter.

At the prompt, type the index number for the UPS record to be changed and press Enter.

At the prompt, type the corresponding number from the list of the UPS types and press Enter.

Example

The following command changes UPS type for the record at index number 2 to ‘MGE’:

Smart CDU: set ups type<Enter>

1 Type: Liebert

Host/IP: DC1Liebert1

2 Type: Powerware

Host/IP: DC1Powerware1

Select UPS(1-8): 2<Enter>

UPS types:

1 -- APC

2 -- Liebert

3 -- MGE

4 -- Tripp Lite

5 -- Generic (RFC1628)

6 –- Hewlett Packard

7 -- Minuteman

8 -- Mitsubishi

9 -- Powerware

10 -- Toshiba

Select type(1-10): 3<Enter>

Changing the UPS host address:

The Set UPS Host command is used to change the IP address or hostname for each UPS record.

Hostnames may be up to 60 characters long.

To change a UPS host address:

At the Smart CDU: prompt, type set ups host and press Enter.

At the prompt, type the index number for the UPS record to be changed and press Enter.

At the prompt, type IP address or hostname for the UPS and press Enter.

Example

The following command changes UPS hostname for the record at index number 2 to ‘DC1MGE1’:

Smart CDU: set ups host<Enter>

1 Type: Liebert

Host/IP: DC1Liebert1

2 Type: MGE

Host/IP: DC1Powerware1

Select UPS(1-8): 2<Enter>

Host/IP: DC1MGE1<Enter>

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 89 90

Kommentare zu diesen Handbüchern

Keine Kommentare

Server Technology PT40 Installationshandbuch Seite 45

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Server Technology PT40