Server Technology PT40 Installationshandbuch PDF herunterladen (Seite 17)

Smart Cabinet Distribution Unit Operations • 17

Installation and Operations Manual

Setting the data-rate for all serial ports:

Select the serial port data-rate from the drop-down menu and press Apply.

Setting the serial port timeout value:

Enter the timeout value (in minutes) in the Connection Timeout field and press Apply.

Creating a descriptive serial port name:

Click on the Edit link in the Action column next to the port to be configured.

On the subsequent Serial Port Edit page, enter a descriptive name. Up to 24 alphanumeric and other typeable

characters (ASCII 33 to 126 decimal) are allowed; spaces are not allowed. Press Apply.

Enabling or disabling serial port active signal checking:

Click on the Edit link in the Action column next to the port to be configured.

On the subsequent Serial Port Edit page, select On or Off from the DSR Check drop-down menu and

press Apply.

Towers

The Towers configuration page is used for assignment and/or editing of:

• Descriptive names

• Serial and Model numbers

• Operation voltage types

NOTE: If set at the factory, the serial number, model number and voltage type WILL NOT be user-editable.

Creating a descriptive tower name:

In the Tower Name field, enter a descriptive name and press Apply.

Setting the tower serial number:

In the Serial Number field, enter the serial number of the unit and press Apply.

Setting the tower model number:

In the Model Number field, enter the model number of the unit and press Apply.

Setting the operational AC or DC voltage type:

From the AC/DC drop-down menu, select AC or DC, and press Apply.

Setting the operational AC voltage type:

From the 3-Phase drop-down menu, select yes or no, and press Apply.

Input Feeds

The Input Feeds configuration page is used for assignment and/or editing of input feed descriptive

names, operational voltage and maximum load capacity.

Creating a descriptive input feed name:

In the Input Feed Name field, enter a descriptive name and press Apply.

Setting the infeed operational voltage:

In the Input Feed Voltage field, enter a value from 0 to 480 and press Apply.

NOTE: If Smart Load-Shedding has been activated and UPS voltage polling configured for an infeed, the polled voltage

value will be used for all power calculations.

Setting the infeed maximum load capacity:

In the Input Feed Load Capacity field, enter a value from 1 to 255 and press Apply.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 89 90

Keine Kommentare

Server Technology PT40 Installationshandbuch Seite 17