Server Technology PT40 Installationshandbuch PDF herunterladen (Seite 13)

Smart Cabinet Distribution Unit Operations • 13

Installation and Operations Manual

Logging In

Logging in through HTML requires directing the HTML client to the configured IP address of the unit.

To log in by HTML:

In the login window, enter a valid username and password and press OK.

If you enter an invalid username or password, you will be prompted again.

You are given three attempts to enter a valid username and password combination. If all three fail, the

session ends and a protected page will be displayed.

NOTE: The default Sentry username/password is admn/admn.

Power Monitoring

Input Feeds

The Input Feeds page displays:

• Infeed’s absolute and descriptive names

• Infeed status

• Input/branch phase load in amperes

• Input Voltage

• Calculated power usage in Watts.

This page will refresh automatically every 10 seconds.

System

The System page displays:

• Calculated power usage for ALL infeeds in Watts

• Configured total system area in square feet.

• Calculated power usage in Watts/square foot.

This page will refresh automatically every 10 seconds.

UPS

The UPS page displays the following information for each UPS device associated with the Sentry unit:

• Status

• Voltage

• Hostname/IP address

This page will refresh automatically every 10 seconds.

Environmental Monitoring

Input Feeds

The Input Feeds page displays the tower’s absolute and descriptive name and the input, branch or phase

load in amperes of all devices attached to the Sentry at the time the page was loaded. This page will

refresh automatically every 10 seconds

Sensors

The Sensors page displays:

• Temperature/humidity sensor’s absolute and descriptive names

• Temperature/humidity sensor readings in degrees Celsius and percent relative humidity

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 89 90

Keine Kommentare

Server Technology PT40 Installationshandbuch Seite 13