Server Technology PT40 Installationshandbuch PDF herunterladen (Seite 38)

38 • Operations Smart Cabinet Distribution Unit

Installation and Operations Manual

Creating a descriptive tower name:

The Set Tower Name command assigns a descriptive name to a tower. This descriptive name is

displayed when the Show Traps command is issued. See

Displaying trap configuration information on

page

60 for more information on the Show Traps command.

To create a tower name:

At the Smart CDU: prompt, type set tower name followed by the absolute tower name, then a

descriptive name of up to 24 alphanumeric and other typeable characters - (ASCII 33 to 126 decimal)

are allowed; spaces are not allowed. Press Enter.

Example

The following command adds the descriptive name Florida_HQ_1 to tower .a:

Smart CDU: set tower name .a Florida_HQ_1<Enter>

Displaying tower information:

The Show Towers command displays information about the Sentry. This information includes the

absolute and descriptive Sentry names.

To display tower information:

At the Smart CDU: prompt, type show towers and press Enter.

Example

Smart CDU: show towers<Enter>

Tower Tower

ID Name

.A Florida_HQ_1

Creating a descriptive infeed name:

The Set Infeed Name command assigns a descriptive name to an infeed. This descriptive name is

displayed when the Show Traps command is issued. See

Displaying trap configuration information on

page

38 for more information on the Show Traps command.

To create an infeed name:

At the Smart CDU: prompt, type set infeed name followed by the absolute infeed name, then a

descriptive name of up to 24 alphanumeric and other typeable characters - (ASCII 33 to 126 decimal)

are allowed; spaces are not allowed. Press Enter.

Example

The following command adds the descriptive name HQ_1_Infeed_A to the infeed on the Smart CDU:

Smart CDU: set infeed name .aa HQ_1_Infeed_A<Enter>

Displaying infeed information:

The Show Infeeds command displays information about all infeeds. This information includes the

absolute and descriptive infeed names.

To display tower information:

At the Smart CDU: prompt, type show infeeds and press Enter.

Example

Smart CDU: show infeeds<Enter>

Input Input

Feed ID Feed Name

.AA HQ_1_Infeed_A

.AB HQ_1_Infeed_B

.BA HQ_2_Infeed_A

.BB HQ_2_Infeed_B

Displaying the Sentry firmware version:

The Version command displays the Sentry firmware version.

To display the firmware version:

At the Smart CDU: prompt, type version and press Enter.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 89 90

Kommentare zu diesen Handbüchern

Keine Kommentare

Server Technology PT40 Installationshandbuch Seite 38

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Server Technology PT40