Server Technology PT40 Installationshandbuch PDF herunterladen (Seite 23)

Smart Cabinet Distribution Unit Operations • 23

Installation and Operations Manual

Adding and Deleting serial port access:

Click on the Ports link in the Access column for the associated LDAP Group.

On the subsequent LDAP Group - Ports page, select or deselect ports to be accessed by the LDAP Group

and press Apply.

TACACS+

The TACACS+ configuration page is used for setup and maintenance of all settings required to enable

TACACS+ support. For additional information and configuration requirements, see

TACACS+ on page 69.

Enabling or disabling TACACS+ support:

Select Enabled or Disabled from the TACACS+ drop-down menu and press Apply.

Changing the TACACS+ server port:

Enter the port number in the Port field and press Apply.

Setting the TACACS+ server address:

Enter the IP address or hostname in the Primary and/or Secondary Host field and press Apply.

Configuring the authentication order:

Select Remote -> Local or Remote Only from the drop-down menu and press Apply.

For more information on remote authentication order, see

Setting the authentication order: on page 70.

NOTE: Server Technology recommends NOT setting the authentication order to Remote Only until the LDAP has been

fully configured and tested.

Setting the TACACS+ encryption key:

Enter a key and verify the new key the Encryption Key and Verify Encryption Key fields. Press Apply.

For security, key characters are not displayed.

Configuring TACACS+ privilege levels:

Click on the TACACS+ Privilege Levels link at the bottom of the page.

Changing a TACACS+ Privilege Level’s access privilege level:

Click on the Edit link in the Action column for the associated TACACS+ Privilege Level.

On the subsequent TACACS+ Privilege Level - Edit page, select Admin, User, On-only or View-only

from the Access Level drop-down menu and press Apply.

For more information on access levels, see

Changing a user’s access privilege level: on page 19.

Adding and Deleting serial port access:

Click on the Ports link in the Access column for the associated TACACS+ Privilege Level.

On the subsequent LDAP Group - Ports page, select or deselect ports to be accessed by the TACACS+

Privilege Level and press Apply.

The Email configuration page is used for setup and maintenance Email log support. For additional

information and configuration requirements for Email support, see

Logging on page 73.

Enabling or disabling Email support:

Select Enabled or Disabled from the Email Notifications drop-down menu and press Apply.

Setting the SMTP server address:

Enter the IP address or hostname in the SMTP Host field and press Apply.

Changing the SMTP server port:

Enter the port number in the SMTP Port field and press Apply.

Setting the ‘From’ email address:

Enter the ‘from’ email address in the ‘From’ Address field and press Apply.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 89 90

Kommentare zu diesen Handbüchern

Keine Kommentare

Server Technology PT40 Installationshandbuch Seite 23

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Server Technology PT40