Server Technology PT40 Installationshandbuch PDF herunterladen (Seite 33)

Smart Cabinet Distribution Unit Operations • 33

Installation and Operations Manual

Tower Administration

Creating a descriptive tower name:

The Set Tower Name command assigns a descriptive name to a tower. This descriptive name is

displayed when the Show Traps command is issued. See

Displaying trap configuration information on

page

60 for more information on the Show Traps command.

To create a tower name:

At the Smart CDU: prompt, type set tower name followed by the absolute tower name, then a

descriptive name of up to 24 alphanumeric and other typeable characters - (ASCII 33 to 126 decimal)

are allowed; spaces are not allowed. Press Enter.

Example

The following command adds the descriptive name Florida_HQ_1 to tower .a:

Smart CDU: set tower name .a Florida_HQ_1<Enter>

Setting the tower serial number:

The Set Tower ProdSN command is use to set the product serial number.

NOTE: If set at the factory, the serial number WILL NOT be user-editable.

To set the tower serial number:

At the Smart CDU: prompt, type set tower prodsn, followed by the absolute tower name, and the

tower serial number. Press Enter.

Example

The following command sets the serial number for tower .A to ‘AA06F011157’:

Smart CDU: set tower prodsn .a AA06F011157<Enter>

Setting the tower model number:

The Set Tower Model command is use to set the product model number.

NOTE: If set at the factory, the model number WILL NOT be user-editable.

To set the tower model number:

At the Smart CDU: prompt, type set tower model, followed by the absolute tower name, and the tower

model number. Press Enter.

Example

The following command sets the model number for tower .A to ‘CS-24V2-C20’:

Smart CDU: set tower prodsn .a CS-24V2-C20<Enter>

Setting the tower AC or DC voltage type:

The Set Tower command is used to set the product input AC or DC voltage type.

NOTE: If set at the factory, the voltage type WILL NOT be user-editable.

To set the tower AC/DC voltage type:

At the Smart CDU: prompt, type set tower, followed by ac or dc, and the absolute tower name. Press

Enter.

Example

The following command sets the AC/DC voltage type for tower .A to AC:

Smart CDU: set tower ac.a<Enter>

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 89 90

Kommentare zu diesen Handbüchern

Keine Kommentare

Server Technology PT40 Installationshandbuch Seite 33

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Server Technology PT40