Server Technology PT40 Spezifikationen PDF herunterladen (Seite 39)

Setting the subnet mask

The Set Subnet command sets the subnet mask for the network the PT40 will be attached to.

To set the subnet mask:

At the Sentry: prompt, type set subnet, followed by the subnet mask and press Enter.

Example

The following command sets the subnet mask to 255.0.0.0

Sentry: set subnet 255.0.0.0<Enter>

Setting the gateway

The Set Gateway command sets the IP address of the default gateway the Sentry uses to access external

networks.

To set the gateway IP address:

At the Sentry: prompt, type set gateway, followed by the gateway IP address and press Enter.

Example

The following command set the gateway IP address to 12.34.56.1:

Sentry: set gateway 12.34.56.1<Enter>

Setting the DNS IP address

The Set DNS command sets the TCP/IP address of the Domain Name server (DNS).

To set the DNS IP address:

At the Sentry: prompt, type set, followed by dns1 or dns2 and the Domain Name server’s IP address.

Press Enter.

Example

The following command sets the primary Domain Name server IP address to 98.76.54.254:

Sentry: set dns1 98.76.54.254<Enter>

Displaying network configuration information

The Show Network command displays TCP/IP, Telnet, SSH, Web, SSL and SNMP configuration information.

• IP address, subnet mask, gateway and DNS IP addresses

• Enabled-disabled status and port numbers for Telnet, SSH, HTTP,SSL and SNMP support

• HTTP authentication method and SSL access setting

• Network status

See Chapter 4: Advanced Operations on page 43 for more information on SNMP and Remote

Authentication

To display network configuration information:

At the Sentry: prompt, type show network and press Enter.

Example

The following command displays the network configuration information:

Sentry: show network<Enter>

Network Configuration

IP Address: 12.34.56.78 DNS1: 98.76.54.254

Subnet Mask: 255.0.0.0 DNS2: 0.0.0.0

Gateway: 12.34.56.1

Telnet: Enabled Port: 23

SSH: Enabled Port: 65535

HTTP: Enabled Port: 80 Security: BASIC

SSL: Enabled Access: Required

SNMP: Enabled

Network Status

Link: Up

Speed: 100 Mbps

Duplex: Full

Negotiation: Auto

Sentry Commander - PT40 Operations • 39

Installation and Operations Manual

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 73 74

Kommentare zu diesen Handbüchern

Keine Kommentare

Server Technology PT40 Spezifikationen Seite 39

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Server Technology PT40