Server Technology PT40 Spezifikationen PDF herunterladen (Seite 18)

Setting the filepath:

Enter the path of the file to be uploaded in the Directory field, and press Apply.

Setting the filename for upload:

Enter the filename of the file to be uploaded in the Filename field, and press Apply.

Testing the FTP upload configuration:

This test validates that the unit is able to contact and log onto the specified FTP server, download the

firmware file and verify that the firmware file is valid for this unit.

Press Test.

SNTP

The SNTP configuration page is used for setup and maintenance of SNTP support.

Setting the SNTP Server Address:

Enter the IP address in the primary and/or secondary address field and press Apply.

SNMP

The SNMP configuration page is used for setup and maintenance of all settings required to enable

SNMP support as well as access to the trap configuration pages. For additional information on SNMP

support and detailed descriptions of available traps, see SNMP on page 46.

NOTE: Traps are generated according to a hierarchical architecture; i.e. if a Tower Status enters a trap condition, only the

Tower Status trap is generated. Infeed and Outlet Status traps are suppressed until the Tower Status returns to Normal.

Enabling or disabling SNMP support:

Select Enabled or Disabled from the drop-down menu and press Apply.

Setting the community strings:

Enter the community string in the appropriate field and press Apply.

Community strings may be 1 to 24 characters

Setting the trap timer:

Enter a trap timer value in the Error Trap Repeat Time field and press Apply.

The Error Trap Repeat Time value may be 1 to 65535 (in seconds).

Setting trap destinations:

Enter an IP address in the appropriate Trap Destination field and press Apply.

Enabling or disabling tower traps:

Click on the Tower Traps link.

On the subsequent Tower Traps page, select or deselect the desired traps and press Apply.

Configuring input feed traps:

Click on the Input Feed Traps link.

On the subsequent Input Feed Traps page, select or deselect the desired traps and press Apply.

For Load traps, enter a maximum load value for the infeed in the High Load Threshold field and press Apply.

The High Load Threshold value may be 0 to 255 (in amperes).

Configuring outlet traps:

Click on the Outlet Traps link.

On the subsequent Outlet Traps page, select or deselect the desired traps and press Apply.

LDAP

The LDAP configuration page is used for setup and maintenance of all settings required to enable

LDAP support. For additional information and configuration requirements, see LDAP on page 52.

Enabling or disabling LDAP support:

Select Enabled or Disabled from the LDAP drop-down menu and press Apply.

18 • Operations Sentry Commander - PT40

Installation and Operations Manual

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 73 74

Kommentare zu diesen Handbüchern

Keine Kommentare

Server Technology PT40 Spezifikationen Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Server Technology PT40