Server Technology PT40 Spezifikationen PDF herunterladen (Seite 20)

Granting or removing Environmental Monitoring viewing privileges:

Click on the Edit link in the Action column for the associated LDAP Group.

On the subsequent LDAP Group - Edit page, select Yes or No from the Environmental Monitoring

drop-down menu and press Apply.

Adding and Deleting outlet access:

Click on the Outlets link in the Access column for the associated LDAP Group.

On the subsequent LDAP Group - Outlets page, select or deselect outlets to be accessed by the LDAP

Group and press Apply.

Adding and Deleting outlet group access:

Click on the Groups link in the Access column for the associated LDAP Group.

On the subsequent LDAP Group - Groups page, select or deselect outlet groups to be accessed by the

LDAP Group and press Apply.

Adding and Deleting serial port access:

Click on the Ports link in the Access column for the associated LDAP Group.

On the subsequent LDAP Group - Ports page, select or deselect ports to be accessed by the LDAP Group

and press Apply.

TACACS+

The TACACS+ configuration page is used for setup and maintenance of all settings required to enable

TACACS+ support. For additional information and configuration requirements, see TACACS+ on page 61.

Enabling or disabling TACACS+ support:

Select Enabled or Disabled from the TACACS+ drop-down menu and press Apply.

Setting the TACACS+ server IP address:

Enter the IP address in the Host IP1 and/or Host IP2 address field and press Apply.

Setting the TACACS+ encryption key:

Enter a key and verify the new key the Encryption Key and Verify Encryption Key fields. Press Apply.

For security, key characters are not displayed.

Configuring the authentication order:

Select Remote -> Local or Remote Only from the drop-down menu and press Apply.

For more information on remote authentication order, see Setting the authentication order on page 62.

NOTE: Server Technology recommends NOT setting the authentication order to Remote Only until the LDAP has been

fully configured and tested.

Configuring TACACS+ privilege levels:

Click on the TACACS+ Privilege Levels link at the bottom of the page.

Changing an TACACS+ Privilege Level’s access privilege level:

Click on the Edit link in the Action column for the associated TACACS+ Privilege Level.

On the subsequent TACACS+ Privilege Level - Edit page, select Admin, User, On-only or View-only

from the Access Level drop-down menu and press Apply.

For more information on access levels, see Changing a user’s access privilege level: on page 17.

Granting or removing Environmental Monitoring viewing privileges:

Click on the Edit link in the Action column for the associated TACACS+ privilege level.

On the subsequent TACACS+ Privilege Level - Edit page, select Yes or No from the Environmental

Monitoring drop-down menu and press Apply.

20 • Operations Sentry Commander - PT40

Installation and Operations Manual

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 73 74

Kommentare zu diesen Handbüchern

Keine Kommentare

Server Technology PT40 Spezifikationen Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Server Technology PT40