Server Technology PT40 Spezifikationen PDF herunterladen (Seite 21)

Adding and Deleting outlet access:

Click on the Outlets link in the Access column for the associated TACACS+ Privilege Level.

On the subsequent LDAP Group - Outlets page, select or deselect outlets to be accessed by the TACACS+

Privilege Level and press Apply.

Adding and Deleting outlet group access:

Click on the Groups link in the Access column for the associated TACACS+ Privilege Level.

On the subsequent LDAP Group - Groups page, select or deselect outlet groups to be accessed by the

TACACS+ Privilege Level and press Apply.

Adding and Deleting serial port access:

Click on the Ports link in the Access column for the associated TACACS+ Privilege Level.

On the subsequent LDAP Group - Ports page, select or deselect ports to be accessed by the TACACS+

Privilege Level and press Apply.

Tools

The Tools section contains access to rebooting the unit, uploading new firmware as well as resetting the unit to

factory defaults. This section is available to administrative level users only.

Restart

Performing a warm boot:

Select the Restart from the Action drop-down menu and press Apply.

Note: System user/outlet/group configuration or outlet states are NOT changed or reset with this command.

Resetting to factory defaults:

See Chapter 5: for more information on resetting a Sentry to factory defaults from the HTML interface.

Uploading new firmware:

See Appendix B: for more information on uploading new firmware from the HTML interface.

Ping

The Ping feature may be used to test the Sentry’s ability to contact another Ethernet enabled device’s IP

address. For LDAP support, it may also be used to test the configuration of the Domain Name server

IP address by testing for proper name resolution.

Sentry Commander - PT40 Operations • 21

Installation and Operations Manual

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 73 74

Keine Kommentare

Server Technology PT40 Spezifikationen Seite 21