Server Technology PT40 Spezifikationen PDF herunterladen (Seite 34)

Adding an outlet to a group

The Add OutletToGroup command adds an outlet to a group. To add more than one outlet, but not all

outlets, you must use multiple Add OutletToGroup commands.

To add an outlet to a group:

At the Sentry: prompt, type add outlettogroup, optionally followed by an outlet name and group name.

Press Enter, or

Type add OutletToGroup, followed by all and the group name. Press Enter.

Examples

The following commands uses absolute outlet names to add outlets A1 and A2 to group name

ServerGroup_1:

Sentry:add OutletToGroup .a1 ServerGroup_1<Enter>

Sentry:add OutletToGroup .a2 ServerGroup_1<Enter>

The following commands usese the outlets’ descriptive names to add outlets DataServer_1 and

WebServer_1 to group name ServerGroup_1:

Sentry:add OutletToGroup DataServer_1 ServerGroup_1<Enter>

Sentry:add OutletToGroup WebServer_1 ServerGroup_1<Enter>

The following command add all outlets to group name ServerGroup_1:

Sentry: add OutletToGroup<Enter>

Outletname: all<Enter>

Groupname: ServerGroup_1<Enter>

Deleting an outlet from a group

The Delete OutletFromGroup command deletes an outlet from a group. To delete more than one outlet,

but not all outlets, you must use multiple Delete OutletToGroup commands.

To delete an outlet from a group:

At the Sentry: prompt, type delete outletfromgroup, optionally followed by an outlet name and a

group name. Press Enter, or

Type delete outletfromgroup, followed by all then the group name. Press Enter.

Serial Port Administration

Creating a descriptive serial port name

The Set Port Name command assigns a descriptive name to a serial port. You may use this name in

commands that require a port name as an alternative to using the port’s absolute name.

To create an port name:

At the Sentry: prompt, type set port name, followed by the absolute outlet name and a descriptive

name of up to 24 alphanumeric and other typeable characters (ASCII 33 to 126 decimal - spaces are not

allowed). Port names are not case sensitive. Press Enter.

Example

The following command adds the descriptive name Rack1 to Console port:

Sentry: set port name console Rack1<Enter>

Setting the serial ports data-rate

The Set Port Speed command sets the default data-rate for the serial port.

Valid data-rates are 1200, 2400, 4800, 9600, 19200, 38400, 57600 and 115200.

To set the serial port data-rate:

At the Sentry: prompt, type set port speed, follow by the data-rate and press Enter.

Example

The following command sets the serial ports data-rate to 38400 BPS:

Sentry: set port speed 38400<Enter>

34 • Operations Sentry Commander - PT40

Installation and Operations Manual

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 73 74

Kommentare zu diesen Handbüchern

Keine Kommentare

Server Technology PT40 Spezifikationen Seite 34

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Server Technology PT40