Server Technology PT40 Spezifikationen PDF herunterladen (Seite 13)

Configuration

The Configuration section offers access to all unit configuration options including Network,

Telnet/SSH, HTTP/SSL, Serial Ports, Users, FTP, Proxy/SNTP and SNMP. This section is available to

administrative level users only.

System

The System configuration page is used for reference of system information such as Ethernet NIC Serial

Number, Ethernet MAC address and system firmware and hardware revisions as well as assignment and

maintenance of the system location and tower descriptive names.

For description names, up to 24 alphanumeric and other typeable characters (ASCII 33 to 126 decimal –

spaces are not allowed) are allowed.

NOTE: Spaces may be used for the location description only.

Creating a descriptive system location name:

Enter a descriptive name and press Apply.

Configuring the Input Current LED display orientation:

Select Normal or Inverted from the drop-down menu and press Apply.

Creating a descriptive unit name:

Click on the Tower Names link.

On the subsequent Tower Names page, enter a descriptive name and press Apply.

Creating a descriptive input feed name:

Click on the Input Feed Names link.

On the subsequent Input Feed Names page, enter a descriptive name and press Apply.

Creating a descriptive outlet name:

Click on the Outlet Names link which will open the Outlets configuration page. See Outlets on page

16 for additional information on creating descriptive outlet names.

Creating a descriptive serial port/Pass-Thru name:

Click on the Serial Port Names link which will open the Serial Ports configuration page. See Serial

Ports on page 15 for additional information on creating descriptive serial port names.

Network

The Network configuration page is used for maintenance of the network interface. From this page an

administrator may configure the IP address, subnet mask, gateway address, DNS addresses as well as

view the link status, speed and duplex value.

The Sentry is configured with the following network defaults to allow unit configuration out-of-the-box

through either Telnet or HTML:

• IP address: 192.168.1.254

• Subnet Mask: 255.255.255.0

• Gateway: 192.168.1.1

The initial local PC network connection must be configured as noted below:

NOTE: Contact your system administrator for instructions in reconfiguring the network connection. Reconfiguration of

your network connection may require a restart to take effect.

• IP address: 192.168.1.x (where x is 2-253)

• Subnet Mask: 255.255.255.0

NOTE: The unit must be restarted after network configuration changes. See Performing a warm boot: on page 21.

Setting the IP address, subnet mask, gateway or DNS address:

In the appropriate field, enter the IP address, subnet mask, gateway address or DNS address and press Apply.

Sentry Commander - PT40 Operations • 13

Installation and Operations Manual

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 73 74

Kommentare zu diesen Handbüchern

Keine Kommentare

Server Technology PT40 Spezifikationen Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Server Technology PT40